A New High-Current Large-Bandwidth DC Active Current Probe for Power Electronics Measurements - Institut d'électronique, systèmes de communication et microsystèmes Accéder directement au contenu
Article Dans Une Revue IEEE Transactions on Industrial Electronics Année : 2005

A New High-Current Large-Bandwidth DC Active Current Probe for Power Electronics Measurements

Résumé

This paper is focused on the design and the realization of two high-current probes (up to 100 A) whose bandwidths range from dc to 50 MHz. The performance has been met by the association of an active Hall sensor and a passive current transformer. This association will be named an "active current transformer." It will be shown that it has better frequency performance than the classical closed-loop current transducer, usually used for high-current measurements but frequency limited. The electromagnetic interference (EMI) issues, due to the sensor electrical environment are respected thanks to the shielded structure and special inner arrangements of the Hall sensors. Because of its large bandwidth, its large current range, and its EMI ruggedness, this current probe is well matched to power electronics measurements. Index Terms-Current probe, current transformer, electromagnetic interference (EMI), Hall sensor, power electronics.
Fichier principal
Vignette du fichier
ACT_IES_Janvier2004.pdf (706.71 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01870526 , version 1 (07-01-2020)

Identifiants

Citer

Patrick Poulichet, F. Costa, E. Laboure. A New High-Current Large-Bandwidth DC Active Current Probe for Power Electronics Measurements. IEEE Transactions on Industrial Electronics, 2005, 52 (1), pp.243-254. ⟨10.1109/tie.2004.841066⟩. ⟨hal-01870526⟩
29 Consultations
210 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More