LABORATORY
G-SCOP is a multidisciplinary laboratory meeting the scientific challenges of design, management and optimization of products, production and service systems.The research covers the entire product or product/service life cycle, from its creation to its end of life, through the phases of design, production, distribution, use and recycling, reuse or destruction. Our research addresses not only manufacturing industries, but also the service sector such as healthcare systems, energy management and usage, etc.
In this area, two major scientific issues of the forthcoming years are
• Achieving the transition to digital production and design systems
• Developing the human/society centred production and design systems
G-SCOP tackles these challenges through research in Operations Management and Integrated Product Design, supported by a transverse expertise in Industrial Information Systems and Optimization Methods.




Last submissions
-
Niccolò Becattini, Cédric Masclet, Fatma Ben Guefrache, Guy Prudhomme, Gaetano Cascini, et al.. Characterisation of a co-creative design session through the analysis of multi-modal interactions.. 21 ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED17, Aug 2017, Vancouver, Canada. ⟨hal-01657260⟩
-
-
-
-
Christelle Grandvallet, Pierre-Thomas Doutre, Matthieu Museau. Une nouvelle méthode pour dépoudrer des pièces issues du procédé de fusion par faisceau d'électrons. S-MART 2023 -18ème colloque national S.mart, 4-6 avril 2023, Carry le Rouet, France, Arts et Métiers Paristech ENSAM Aix-en-Provence; Université de Toulon, Apr 2023, Carry-Le-Rouet (13), France. ⟨hal-04284186⟩
-
Emilio Ramírez, Nicolas Béraud, Franck Pourroy, François Villeneuve, Matthieu Museau. Conception des surfaces minimales triplement périodiques à densité variable pour la fabrication additive. S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France. ⟨hal-04278700⟩
-
Anthony Dellarre, Nicolas Béraud, Nicolas Tardif, Frédéric Vignat, François Villeneuve, et al.. Caractérisation d'un poste de soudure Cold Métal Transfer pour le pilotage du procédé Wire Arc Additive Manufacturing. S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France. ⟨hal-04278696⟩
-
Diego Verbist, Nicolas Beraud, Frédéric Vignat, Matthieu Museau, Sylvain Lavernhe. Approche phénoménologique du contrôle de la géométrie de cordons en WAAM. S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France. ⟨hal-04278694⟩
-
-
-
-
-
-
-
-
-
-
-
Muhammad Farooq Khan Niazi, David Muñoz-Rojas, Damien Evrard, Matthieu Weber. Comparative Study of the Environmental Impact of Depositing Al 2 O 3 by Atomic Layer Deposition and Spatial Atomic Layer Deposition. ACS Sustainable Chemistry & Engineering, 2023, ⟨10.1021/acssuschemeng.3c04135⟩. ⟨hal-04230574⟩
-