Laser Operation of Tm: LuAG Single-Crystal Fiber Grown by the Micro-Pulling down Method - Institut Lumière Matière Accéder directement au contenu
Article Dans Une Revue Crystals Année : 2021

Laser Operation of Tm: LuAG Single-Crystal Fiber Grown by the Micro-Pulling down Method

Résumé

Single crystals fiber (SCF) of LuAG doped with 2.0 at.% thulium has been grown by using micro-pulling down (µ-PD) technique. A continuous-wave output power of 2.44 W was achieved with a slope efficiency of 11.7% using a 783-nm diode laser as pump source. The beam quality factors M2 were 1.14 and 1.67 in the x and y directions, respectively. This is, to the best of our knowledge, the first report on the Tm:LuAG SCF laser. Using ray tracing analysis, the influence of laser performance by the pump intensity distribution in the SCF was also studied.
Fichier principal
Vignette du fichier
crystals-11-00898-v2.pdf (4.92 Mo) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte
licence : CC BY - Paternité

Dates et versions

hal-03325536 , version 1 (25-08-2021)

Identifiants

Citer

Jian Liu, Jifei Dong, Yinyin Wang, Hangqi Yuan, Qingsong Song, et al.. Laser Operation of Tm: LuAG Single-Crystal Fiber Grown by the Micro-Pulling down Method. Crystals, 2021, 11 (8), pp.898. ⟨10.3390/cryst11080898⟩. ⟨hal-03325536⟩
14 Consultations
38 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More