A Computational Study of a Two-fluid Atomizing Coaxial Jet: Validation against Experimental Back-lit Imaging and Radiography and the Influence of Gas Velocity and Contact Line Model - Laboratoire des écoulements géophysiques et industriels Accéder directement au contenu
Article Dans Une Revue International Journal of Multiphase Flow Année : 2023

A Computational Study of a Two-fluid Atomizing Coaxial Jet: Validation against Experimental Back-lit Imaging and Radiography and the Influence of Gas Velocity and Contact Line Model

Résumé

Numerical simulations of liquid atomization in a two-fluid coaxial geometry have been performed using a geometric Volume-of-Fluid method. Experimental measurements have been obtained using visible light back-lit imaging and X-ray radiography. Simulations are validated against experiments, using the same geometry and fluid injection rates of air and water, by showing excellent agreement in quantities such as liquid mass distribution in the spray formation region and the liquid jet length statistics and temporal dynamics. At the nozzle exit, the coflowing liquid and gas streams are separated by a cylindrical splitter plate. The liquid is laminar and modeled using a Poiseuille flow while the gas inflow model and the contact line model are varied. For the gas velocity models, the vorticity thickness is shown to have a strong influence on the downstream liquid distribution; the difficulty of its modeling and routes to overcome them are discussed. For the contact line model, pinning the interface to the inner wall of the splitter plate leads to an initial increase in the diameter of the liquid jet just downstream of the nozzle exit. In contrast, pinning to the outer wall of the splitter plate or allowing for a free moving contact line results in a monotonic decrease in the diameter of the liquid jet as the downstream distance is increased, in agreement with the experimental observations and measurements. A sub-grid scale contact line model based on a static contact angle is introduced. The static contact angle is varied in the model, showing that the liquid remains intact longer as the static contact angle is increased.
Fichier principal
Vignette du fichier
muri_sim_ijmf2021_authorversion.pdf (4.52 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04112632 , version 1 (31-05-2023)

Identifiants

Citer

Lam Vu, Nathanaël Machicoane, Danyu Li, Timothy Morgan, Theodore Heindel, et al.. A Computational Study of a Two-fluid Atomizing Coaxial Jet: Validation against Experimental Back-lit Imaging and Radiography and the Influence of Gas Velocity and Contact Line Model. International Journal of Multiphase Flow, 2023, ⟨10.1016/j.ijmultiphaseflow.2023.104520⟩. ⟨hal-04112632⟩

Collections

UGA CNRS OSUG LEGI
13 Consultations
35 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More