Microstructural, morphological characterization and corrosion behavior of sand cast AlSi10Cu(Fe) alloy in chloride solution - Laboratoire Interfaces et Systèmes Electrochimiques Accéder directement au contenu
Article Dans Une Revue Chemical Papers Année : 2022

Microstructural, morphological characterization and corrosion behavior of sand cast AlSi10Cu(Fe) alloy in chloride solution

Résumé

In order to examine the relationship between the microstructure and the corrosion behavior in chloride solution, the microstructure of AlSi10Cu (Fe) sand cast aluminum alloy has been investigated by using different techniques including scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction analysis and electrochemical measurements. The microscopic analysis and X-ray diffraction analysis show several phases in addition to matrix phase, including pores and phases at nano- and microscales. The average rate of micropores and nanopores is 4% and 5%, respectively. The nanoparticle size varies between 20 and 150 nm. Plates and corals-like silicon eutectic, rich-Cu phase and Chinese script phase (Al15(Mn,Fe)3Si2) have been observed. Energy-dispersive spectroscopy analyses show the presence of a new phase (Cu61.22 Zn25.39Ni11.85 Al1.54), and the pitting corrosion has been demonstrated to be initiated at the nanopores. The electrochemical measurements exhibited the effect of several elements and porosities on the corrosion kinetics that is controlled by charge transfer and diffusion phenomenon. Wide passive windows, followed by the breakdown of passive film and excessive dissolution, have been observed in 0.3 and 3 wt% NaCl solutions. The electrochemical measurements show a high corrosion rate which does not recommend the use of this alloy in seawater.
Fichier principal
Vignette du fichier
korichi zazi delbrel ngo chopart clean version 2.pdf (1.38 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03597124 , version 1 (21-11-2022)

Identifiants

Citer

Belkacem Korichi, Nacer Zazi, Stéphanie Delbrel, Kieu Ngo, Jean Paul Chopart. Microstructural, morphological characterization and corrosion behavior of sand cast AlSi10Cu(Fe) alloy in chloride solution. Chemical Papers, 2022, 76, pp.2947-2967. ⟨10.1007/s11696-022-02064-9⟩. ⟨hal-03597124⟩
85 Consultations
37 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More