Application of a dislocation based model for Interstitial Free (IF) steels to typical stamping simulations - Laboratoire des Sciences des Procédés et des Matériaux Accéder directement au contenu
Article Dans Une Revue American Institute of Physics Conf. Proc. Année : 2010

Application of a dislocation based model for Interstitial Free (IF) steels to typical stamping simulations

Résumé

With a view to environmental, economic and safety concerns, car manufacturers need to design lighter and safer vehicles in ever shorter development times. In recent years, High Strength Steels (HSS) like Interstitial Free (IF) steels which have higher ratios of yield strength to elastic modulus, are increasingly used for sheet metal parts in automotive industry to meet the demands. Moreover, the application of sheet metal forming simulations has proven to be beneficial to reduce tool costs in the design stage and to optimize current processes. The Finite Element Method (FEM) is quite successful to simulate metal forming processes but accuracy largely depends on the quality of the material properties provided as input to the material model. Common phenomenological models roughly consist in the fitting of functions on experimental results and do not provide any predictive character for different metals from the same grade. Therefore, the use of accurate plasticity models based on physics would increase predictive capability, reduce parameter identification cost and allow for robust and time-effective finite element simulations. For this purpose, a 3D physically based model at large strain with dislocation density evolution approach was presented in IDDRG2009 by the authors [1]. This model allows the description of work-hardening's behavior for different loading paths (i.e. uni-axial tensile, simple shear and Bauschinger tests) taking into account several data from microstructure (i.e. grain size, texture, etc...). The originality of this model consists in the introduction of microstructure data in a classical phenomenological model in order to achieve work-hardening's predictive character for different metals from the same grade. Indeed, thanks to a microstructure parameter set for an Interstitial Free steel, it is possible to describe work-hardening behavior for different loading paths of other IF steels by only changing the mean grain size and the chemical composition. During sheet metal forming processes local material points may experience multi-axial and multi-path loadings. Before simulating actual industrial parts, automotive manufacturers use validation tools - e.g. the Cross-Die stamping test. Such typical stamping tests enable the evaluation of a complex distribution of strains. The work described is an implementation [2] of a 3D dislocation based model in ABAQUS/Explicit and its validation on a Finite Element (FE) Cross-Die model. In order to assess the performance and relevance of the 3D dislocation based model in the simulation of industrial forming applications, the results of thinning profiles predicted along several directions and the strain distribution were obtained and compared with experimental results for IF steels with grain sizes varying in the 8-22 μm value range.
Fichier principal
Vignette du fichier
LEM3-AIPCP-CARVALHO-2010.pdf (520.99 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01206142 , version 1 (28-09-2015)

Identifiants

  • HAL Id : hal-01206142 , version 1
  • DOI : 10.1063/1.3457539
  • ENSAM : http://hdl.handle.net/10985/10196

Citer

Tales Carvalho Resende, Tudor Balan, Farid Abed-Meraim, Salima Bouvier, Simon-Serge Sablin. Application of a dislocation based model for Interstitial Free (IF) steels to typical stamping simulations. American Institute of Physics Conf. Proc., 2010, 1252, pp.1339-1346. ⟨10.1063/1.3457539⟩. ⟨hal-01206142⟩
84 Consultations
196 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More