Corrosion behaviour of brazed multilayer material AA4343/AA3003/AA4343: Influence of coolant parameters - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Article Dans Une Revue Corrosion Science Année : 2007

Corrosion behaviour of brazed multilayer material AA4343/AA3003/AA4343: Influence of coolant parameters

Résumé

This paper is the second part of a work devoted to corrosion in brazed AA4343/AA3003/AA4343 materials on the water side of automotive heater cores. In the first part of the study [S. Tierce, N.Pébère, C. Blanc, C. Casenave, G. Mankowski, H. Robidou, Electrochim. Acta 52 (2006) 1092], corrosion initiation in the surface layer (i.e. the residual cladding) has been investigated. It has been associated to defective sites in the passive film covering the alloy. The defective sites are linked to a-Al(Mn,Fe)Si particles built up during brazing process. Interactions between a-Al(Mn,Fe)Si particles and the matrix are responsible for the observed behaviour. The present study focuses on the propagation of corrosion through the material in neutral water-ethylene glycol mixtures with and without chlorides. Comparison of the electrochemical behaviour of the three layers of the brazed material (i.e. the residual cladding, the "band of dense precipitates (BDP)" and the core material) revealed that the residual cladding was nobler than the BDP and the core material and thus that the corrosion should propagate through the inner layers due to galvanic coupling: the inner layers constitute the anode and the residual cladding the cathode. Increasing the ethylene glycol content in the water-ethylene glycol mixture decreased the rate of consumption of the materials whereas addition of chloride ions increased it. Mass variation measurements of brazed material in different solutions containing the degradation products of ethylene glycol showed that only glycolate ions had a slight detrimental effect. Corrosion tests performed in heater core tubes allowed the propagation mechanisms to be confirmed.

Domaines

Matériaux
Fichier principal
Vignette du fichier
tierce_2422.pdf (787.85 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00808899 , version 1 (08-04-2013)

Identifiants

Citer

Séverin Tierce, Nadine Pébère, Christine Blanc, Christian Casenave, Georges Mankowski, et al.. Corrosion behaviour of brazed multilayer material AA4343/AA3003/AA4343: Influence of coolant parameters. Corrosion Science, 2007, vol. 49, pp. 4581-4593. ⟨10.1016/j.corsci.2007.04.013⟩. ⟨hal-00808899⟩
165 Consultations
799 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More