Temperature dependence of the conduction mechanisms through a Pb(Zr,Ti)O3 thin film - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Article Dans Une Revue Thin Solid Films Année : 2014

Temperature dependence of the conduction mechanisms through a Pb(Zr,Ti)O3 thin film

Résumé

The conduction mechanisms through a lead zirconate titanate (PZT) thin film grown by pulsed laser deposition with a La0.67Sr0.33MnO3 (LSMO) buffer layer on epitaxial Pt (111) were assessed in the 230-330 K temperature range. X-Ray diffraction and transmission electron microscopy evidenced a columnar growth of (001)- and (011)-oriented PZT grains. The leakage current through the Pt/PZT/LSMO/Pt structure was then systematically measured. From current vs. time curves, a threshold voltage was found below which stable and reproducible current values are obtained, thus avoiding resistance degradation. The conduction mechanism changes from interface controlled at low temperatures to bulk controlled around room temperature. The hopping-type conductivity evidenced above 270 K is consistent with the extended defects and columnar microstructure of the PZT film.
Fichier non déposé

Dates et versions

hal-01009981 , version 1 (19-06-2014)

Identifiants

Citer

C. Jegou, L. Michalas, T. Maroutian, G. Agnus, M. Koutsoureli, et al.. Temperature dependence of the conduction mechanisms through a Pb(Zr,Ti)O3 thin film. Thin Solid Films, 2014, 563, pp.32-35. ⟨10.1016/j.tsf.2013.12.043⟩. ⟨hal-01009981⟩
41 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More