Volatile species release during torrefaction of wood and its macromolecular constituents: Part 1-Experimental study - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Article Dans Une Revue Energy Année : 2014

Volatile species release during torrefaction of wood and its macromolecular constituents: Part 1-Experimental study

Résumé

Torrefaction tests were carried out in a thermobalance and in a lab-scale device on beechwood and on its constituents cellulose, lignin and xylan. The main volatile species measured were water, formaldehyde, acetic acid and carbon dioxide. Thanks to measurement before volatiles condensation, the yield of formaldehyde was shown to be higher than usually observed in literature. Smaller amounts of methanol, carbon monoxide, formic acid and furfural were also quantified. Each constituent did not produce all species. Beech torrefaction could be described by the summative contribution of its three constituents up to 250 degrees C. At 280 degrees C and 300 degrees C, tests performed with constituents mixtures showed that there were interactions between cellulose and the two other constituents. A hypothetical mechanism was proposed to explain these interactions. (C) 2014 Elsevier Ltd. All rights reserved.
Fichier principal
Vignette du fichier
volatile-species-part-1.pdf (1.21 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01611983 , version 1 (16-03-2018)

Identifiants

Citer

Timothee Nocquet, Capucine Dupont, Jean-Michel Commandre, Maguelone Grateau, Sebastien Thiery, et al.. Volatile species release during torrefaction of wood and its macromolecular constituents: Part 1-Experimental study. Energy, 2014, 72, p. 180-187. ⟨10.1016/j.energy.2014.02.061⟩. ⟨hal-01611983⟩
121 Consultations
400 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More