On the validation of integrated DIC with tapered double cantilever beam tests - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Article Dans Une Revue Engineering Fracture Mechanics Année : 2018

On the validation of integrated DIC with tapered double cantilever beam tests

Résumé

Full-field measurement methods such as integrated digital image correlation bypass the need for post-processing the displacement data upon minimizing the gap between simulation and experiment. This paper discusses the validation of this method by comparing its results with an approach based on compliance values measured from crack mouth opening displacement and load data to calculate mode I stress intensity factors (SIFs) and crack tip positions. Tapered double cantilever beams are used as a test case to evaluate the quasi-brittle fracture response of PMMA. The results demonstrate the ability of the proposed technique to obtain accurate determinations of SIFs and crack length using the tapered geometry. Additionally, both methods yield consistent results, which validates the integrated approach against an independent method.
Fichier principal
Vignette du fichier
EFM2018a-ccsd.pdf (5.63 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01674562 , version 1 (03-01-2018)

Identifiants

Citer

Thiago Melo Grabois, Jan Neggers, Laurent Ponson, François Hild, Romildo Dias Toledo Filho. On the validation of integrated DIC with tapered double cantilever beam tests. Engineering Fracture Mechanics, 2018, 191, pp.311-323. ⟨10.1016/j.engfracmech.2017.12.015⟩. ⟨hal-01674562⟩
188 Consultations
258 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More