Thermoelectric Higher Manganese Silicide: Synthetized, sintered and shaped simultaneously by selective laser sintering/Melting additive manufacturing technique - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Article Dans Une Revue Materials Letters Année : 2018

Thermoelectric Higher Manganese Silicide: Synthetized, sintered and shaped simultaneously by selective laser sintering/Melting additive manufacturing technique

Résumé

Complex geometry legs were advantageous to obtain higher thermoelectric potential due to a better thermal dissipation. Among all industrial processes, additive manufacturing using a selective laser sintering (SLS) or melting (SLM) techniques is the most promising to obtain such complex-shape legs without machining step. In this work, for the first time, Higher Manganese Silicide (HMS) sheet samples were synthetized, sintered and shaped simultaneously by additive manufacturing from ball milled manganese and silicon powder. Impact of surface power density and scanning rate of the laser on the microstructural and structural properties was discussed for some SLS/M parameters. Characterizations have shown that both densification and pure HMS phase can be obtained by SLS/M.

Domaines

Matériaux
Fichier principal
Vignette du fichier
thimont_19797.pdf (1.41 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01756937 , version 1 (03-04-2018)

Identifiants

Citer

Yohann Thimont, Lionel Presmanes, Vincent Baylac, Philippe Tailhades, David Berthebaud, et al.. Thermoelectric Higher Manganese Silicide: Synthetized, sintered and shaped simultaneously by selective laser sintering/Melting additive manufacturing technique. Materials Letters, 2018, 214, pp.236-239. ⟨10.1016/j.matlet.2017.12.026⟩. ⟨hal-01756937⟩
104 Consultations
179 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More