Temperature evolution in a WC-6% Co cutting tool during turning machining : experiment and finite element simulations - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Article Dans Une Revue WSEAS Transactions on Heat and Mass Transfer Année : 2011

Temperature evolution in a WC-6% Co cutting tool during turning machining : experiment and finite element simulations

Résumé

The present paper focuses on thermal simulations and temperature measurements in a cutting tool during the machining process. The experimental studies deal with turning an AISI 1045 steel with cemented carbide insert (WC-%6Co). During machining, transient temperatures are measured at two points in cutting tool using the embedded thermocouple method. Three cutting force components are simultaneously recorded. The thermal simulations are based on the calculation of the heat flux from cutting forces and heat partition coefficient. Results obtained by thermal simulations are in good agreement with experimental ones.
Fichier principal
Vignette du fichier
temperature-evolution.pdf (681.33 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01847794 , version 1 (25-09-2018)

Identifiants

  • HAL Id : hal-01847794 , version 1

Citer

Tchadja Kagnaya, Myriam Lazard, Laurence Lambert, Christine Boher, Thierry Cutard. Temperature evolution in a WC-6% Co cutting tool during turning machining : experiment and finite element simulations. WSEAS Transactions on Heat and Mass Transfer, 2011, 6 (3), pp.71-80. ⟨hal-01847794⟩
143 Consultations
115 Téléchargements

Partager

Gmail Facebook X LinkedIn More