Topographically selective deposition - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Article Dans Une Revue Applied Physics Letters Année : 2019

Topographically selective deposition

Résumé

In this paper, we present a topographically Selective Deposition process which allows the vertical only coating of three-dimensional (3D) nano-structures. This process is based on the alternate use of plasma enhanced atomic layer deposition (PEALD) and sputtering carried out in a PEALD reactor equipped with a radio-frequency substrate biasing kit. A so-called super-cycle has been conceived, which consists of 100 standard deposition cycles followed by an anisotropic argon sputtering induced by the application of a 13.56 MHz biasing waveform to the substrate holder in the PEALD chamber. This sputtering step removes the deposited material on horizontal surfaces only, and the sequential deposition/etch process allows effective deposition on vertical surfaces only. Thus, it opens up a route for topographically selective deposition, which can be of interest for the fabrication of 3D vertical Metal-Insulator-Metal devices.
Fichier principal
Vignette du fichier
Chaker2019.pdf (281.2 Ko) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-01997456 , version 1 (16-02-2024)

Identifiants

Citer

Ahmad Chaker, Christophe Vallée, Vincent Pesce, Samia Belahcen, Rémi Vallat, et al.. Topographically selective deposition. Applied Physics Letters, 2019, 114 (4), pp.043101. ⟨10.1063/1.5065801⟩. ⟨hal-01997456⟩
66 Consultations
6 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More