Analysis of in-grain orientation distributions in deformed aluminium using X-ray diffraction and finite elements
Analyse par diffraction des rayons X et éléments finis des distributions d'orientations intragranulaires dans l'aluminium déformé
Résumé
The lattice orientation distributions developing inside individual grains of a polycrystalline aluminium sample subjected to plastic deformation are analysed. In the experiment, diffraction contrast tomography (DCT) and far-field 3D X-ray diffraction microscopy (3DXRD) are used to track the development of the orientation distributions of 466 grains of an aluminium polycrystal deformed in tension to successive strains of 1.0, 1.5, 2.0, 2.5 and 4.5%. A new method is presented and employed to determine the in-grain orientation distributions from broadening of the diffraction spots. The polycrystal deformation is then simulated using the crystal-plasticity finite element method, starting from the initial, DCT-determined microstructure. The experimental and numerical in-grain lattice orientation distributions are analysed and compared in terms of trends over all grains and grain by grain.
Fichier principal
Renversade_2019_IOP_Conf._Ser. _Mater._Sci._Eng._580_012022-1.pdf (3.34 Mo)
Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte
Licence : CC BY - Paternité
Licence : CC BY - Paternité