Displacement Talbot Lithography for nano-engineering of III-nitride materials - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Article Dans Une Revue Microsystems & Nanoengineering Année : 2019

Displacement Talbot Lithography for nano-engineering of III-nitride materials

Pierre-Marie Coulon
  • Fonction : Auteur
  • PersonId : 1082960
Pierre Chausse
  • Fonction : Auteur
Sebastian Walde
  • Fonction : Auteur
Johannes Enslin
  • Fonction : Auteur
Robert Armstrong
  • Fonction : Auteur
Sylvia Hagedorn
Tim Wernicke
Jean Massies
  • Fonction : Auteur
Jesus Zúñiga-Pérez
Markus Weyers
Michael Kneissl
  • Fonction : Auteur
Philip Shields

Résumé

Nano-engineering III-Nitride semiconductors offers a route to further control the material and optoelectronic properties, enabling novel functionalities and applications. Although various lithography techniques are employed to nano-engineer these materials, the scalability and cost of the fabrication process can be an obstacle for manufacturing. In this paper, we report on the use of a fast, robust and flexible emerging patterning technique called Displacement Talbot lithography (DTL), to successfully nano-engineer III-Nitride materials. DTL, along with its combination with a lateral planar displacement (D 2 TL), allow the fabrication of numerous periodic nano-patterns with a broad range of filling factors such as nanoholes, nanodots, nanorings and nanolines; all these features being achievable from one single mask. These nano-patterns have been used to create dielectric and metal masks in order to accomplish the following: the selective area growth of InGaN/GaN core-shell nanorods, the top-down plasma etching of III-nitride nanostructures, the top-down sublimation of GaN nanostructures, the hybrid top-down/bottom-up growth of AlN nanorods and GaN nanotubes, and the fabrication of nano-patterned sapphire substrates for AlN growth. Compared to their planar counterparts, these 3D nanostructures enable the reduction or filtering of defects and/or the enhancement of the light extraction, therefore improving the efficiency of the final device. These results, reproducible and achieved on a wafer scale via DTL, could potentially unlock the manufacturing of nano-engineered III-Nitride materials.
Fichier principal
Vignette du fichier
MN_Coulon2019 accepted manuscript.pdf (1.36 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03024884 , version 1 (26-11-2020)

Identifiants

Citer

Pierre-Marie Coulon, Benjamin Damilano, Blandine Alloing, Pierre Chausse, Sebastian Walde, et al.. Displacement Talbot Lithography for nano-engineering of III-nitride materials. Microsystems & Nanoengineering, 2019, 5 (1), ⟨10.1038/s41378-019-0101-2⟩. ⟨hal-03024884⟩
64 Consultations
71 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More