Influence of microstructure on the fretting resistance of Al‐Cu‐Li alloys - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Chapitre D'ouvrage Année : 2012

Influence of microstructure on the fretting resistance of Al‐Cu‐Li alloys

Résumé

The resistance of two Al-Cu-Li alloys (2050 and 2196) to fretting has been investigated. For each material two heat treatments have been studied (T8 and low temperature ageing). Fretting tests with a cylinder-plane configuration have been performed in the partial slip regime. The results obtained show that the low temperature temper gives a better resistance to fretting crack initiation and propagation than the T8 temper for both alloys. The 3D shape of the fretting cracks has been observed by high resolution synchrotron X-ray tomography. Multiple initiation sites were observed below the contact. In their early stages of development, the fretting cracks grow approximately radially within the material leading to thumb nail cracks which eventually merge laterally. The difference in fretting resistance is analysed with respect to the 3D fracture surface of the fretting cracks in relation with the alloys precipitation state.
Fichier principal
Vignette du fichier
Delacroix2012.pdf (239.5 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01668800 , version 1 (13-01-2023)

Licence

Paternité

Identifiants

Citer

Jessica Delacroix, Sophie Cazottes, Armelle Daniélou, Siegfried Fouvry, Jean-Yves Buffière. Influence of microstructure on the fretting resistance of Al‐Cu‐Li alloys. Hasso Weiland; Anthony D. Rollet; William A. Cassada. ICAA13. Pittsburgh Conference Proceedings, Springer, pp.523-528, 2012, The Minerals, Metals & Materials Series (, ⟨10.1007/978-3-319-48761-8_76⟩. ⟨hal-01668800⟩
164 Consultations
6 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More