Assembly and validation of the SSD silicon microstrip detector of ALICE - CNRS - Centre national de la recherche scientifique Accéder directement au contenu
Communication Dans Un Congrès Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment Année : 2006

Assembly and validation of the SSD silicon microstrip detector of ALICE

Résumé

The Silicon Strip Detector (SSD) forms the two outermost layers of the Inner Tracking System (ITS) of ALICE. The SSD detector consists of 1698 double-sided silicon microstrip modules. The electrical connection between silicon sensor and front-end electronics is made via TAB-bonded aluminium polyimide cables (chip-cables). The module assembly is challenging because of the module geometry and the use of chip-cables. This article describes the assembly procedure and the test protocol used.
Fichier principal
Vignette du fichier
Bregant_TIME05_rev.pdf (611.99 Ko) Télécharger le fichier
Loading...

Dates et versions

in2p3-00110937 , version 1 (07-11-2006)

Identifiants

Citer

M. Bregant, O. Borysov, L. Bosisio, P. Camerini, G. Contin, et al.. Assembly and validation of the SSD silicon microstrip detector of ALICE. TIME 2005 -1st Workshop on Tracking in High Multiplicity Environments, Oct 2005, Zurich, Switzerland. pp.18-21, ⟨10.1016/j.nima.2006.05.024⟩. ⟨in2p3-00110937⟩
38 Consultations
156 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More