Monitoring soil water content and its salinity with high-precision and low-cost in-situ sensors
Résumé
The article presents an in-situ sensor to monitor soil moisture and water salinity by measuring soil permittivity and conductivity at a frequency 24 MHz via an admittance approach. It addresses difficulties encountered in other permittivitybased sensors. A self-balanced bridge provides on one measurement a digital output linear to capacitance and conductance of electrodes in soil with low offset, high phase resolution, and taking into account all parasitic impedances. Circuit design and procedures to achieve it are described, using electric circuit theory and component specifications. Probe geometry, two parallel cylinders, permits insertion in soil from surface, low disturbances and a high sample volume around electrodes. It provides an analytical relation to convert admittance to soil permittivity. Calibration of a sensor with air, alcohols and water fixes its sensitivity and residual phase and inductance for an uncertainty lower than 2% over a range up to 80 and 200 mS•m −1. Identical sensors can use same parameters after adjusting in one simple operation bridge phases. Thermal drift and its consequences on soil variable measurement are investigated and physical origins identified. It permits to reduce the phase drift within ±150ppm.°C−1 rad to keep accuracy.
Origine | Fichiers produits par l'(les) auteur(s) |
---|